How To Clean Toilet Siphon Jet?
In toilets, water enters the bowl through 2 channels; most of the water dumped into the bowl through a siphon jet parallel to the toilet trap. The remaining water enters the bowl through jets located on the rim of the toilet. They are positioned at an angle to create a swirling effect.
In the toilet bowl, the siphoned jets are small holes less than an inch wide. These tiny holes allow water from the tank to flow down into the bowl. These jets are located at a dark location; if not regularly clean, it gets infested with mold, debris, mineral deposits, especially calcium weakening the toilet flushing. The Jet holes provide an ideal environment for the growth of fungus and bacteria.
While cleaning the toilet, people emphasize rim jets and ignore the siphon jet, which plays a vital role in flushing the waste. This guide will show you how to clean toilet siphon jet and how to clean clogged Siphon Jet.
How To Deep Clean Toilet siphons (How to Unclog Toilet Siphon)?
You can use some simple working methods to remove the mineral buildup and bacteria from your toilet siphon jets.
1. Cleaning with Vinegar
If your siphon jet and rim holes are clogged with minerals, clean toilet jets with vinegar. This is an effective technique to clean toilet siphons. In this method of removing the minerals, you will need some goods.
Materials Needed
- Mirror
- Cleaning Detergents
- Rubber Gloves
- Spray bottle
- Face Mask
- White Vinegar
- Toilet Cleaning brush
Method
- Wear gloves, use the mirror to inspect the jet holes for determining the amount of dirt.
- For some people, the vinegar odor is strong, so we strongly recommend using a face mask.
- Take one cup of vinegar and boil it. Allow it to cool and add in the spray bottle.
- Now spray the Vinegar underneath the rim and siphon jets.
- Wait for an hour allowing the minerals and debris to slowly spill down the bowl.
- After an hour, gently scrub with a brush. Steadily move the brush around the rim until all the dirt leaves the siphon jets.
- Again use the mirror to check for any remaining dirt. In case there is some dirt, repeat the steps until the holes are clean. Sometimes if minerals have been there for a long time, the dirt will take time to get removed. You might need cleaning detergent and aggressive scrubbing to clean the jets.
- Once you are done with the process, use a toilet brush and cleaner to clean the bowl.
2. Duct Tape Method
In this method of removing the debris and mineral, Vinegar will be used with duct tape to trap the Vinegar for a longer time.
Material Needed
- Vinegar
- Brush
- Duct Tape
- Mirror
Method
- Clean the toilet using a brush.
- Turn off the water supply to the toilet tank.
- Flush the tank for one last time to remove all the water.
- Now dry the bowl and place the duct tape under the rim, firmly coverup the water jets.
- Fill the toilet tank with Vinegar and flush it.
- The duct tape will seal the water allowing the rim and jets to remain soaked in the Vinegar softening the calcium layers stuck in holes.
- After an hour, remove the duct tape and gently scrub to check if the dirt has been removed.
3. Cleaning the Bacteria around the Siphon Jets
Siphons jet holes are the prime location for bacteria growth. If the siphon jet blocked due to bacteria, you need to use disinfectants and detergents to kill the bacteria.
Materials Needed
- A Bucket
- Soft hand brush
- Vinegar
- Detergent or Infectant
- Baking soda
Method
- Flush down water from the tank to get a sight of bacteria’s existence.
- Create a paste using baking soda and Vinegar. Ensure the paste is thick enough to stick around the siphon holes.
- Precisely apply the paste make sure the paste gets into the siphon jet holes.
- Wait for half an hour.
- Wipe down the paste using the rag.
- Use the mirror to check if all the bacteria is removed. If the fraction of bacteria is still intact, repeat the same procedure to get a clean siphon jet.
Keeping Your Jets Clean
Once you have completed cleaning toilet jets, you can maintain toilet hygiene by regularly cleaning toilet siphon hole. For removing the bacteria, use manufacturer recommended bleach, avoid using abrasive cleaners. These can damage the rubber parts, e.g., the flapper valve. The extensive damage could also nullify the warranty.
To clean clogged siphon jet, monthly pour warm Vinegar into the tank and wait for an hour. It will remove all the mineral deposits. You can also use wire or brush to clean.
We hope our How to clean toilet siphons helps clean toilet siphons. If you have more questions regarding how to clean toilet jets write in the comment section.
FAQs
what is a toilet siphon?
Siphon jet are small holes near the bottom of the bowl. These holes allow the flow of water to flush the toilet bowl.
Do all the toilets have Siphon jets?
No, not all the toilets use a siphon jet system. However, these are the most dominating type of flushing system.
Why my toilet Jet is Bubbling?
The bubbling is the first sign of a clogged waterway. If you notice bubbling water, try to clean the siphon as soon as possible.
33 comments